The State Display; List Displays - HP 1630A Operating And Programming Manual

Model 1630A/D/G
State Measurements
THE STATE DISPLAY
List Displays
List displays may be obtained when any of the state trace mode measurements are being performed, except
when in the time interval overview mode . The content and use of the list display depends upon which trace
mode is being used . Therefore, list displays are discussed for each trace mode .
[Single] LIST DISPLAYS
Figure 4-40 shows a typical list of states that were captured from a logic software system . Line 0000 (the trigger
line) is on screen . Lines-0003 through-0001 showthree linesof pretriggerinformation (a pretriggersequence
in the Trace Specification .)
Display Control Fields
® Listing---------- Data Acquired Oct 27 1982 16 :27
I-
Figure 4-40 . Typical List Display In Single Trace
Mode
Base :
hexadecimal, decimal, octal, binary, ASCII (for labels from 6to 16 bits), user (values
assigned in [User Base] menu), and REL+HEX (values assigned in [Relocation]
menu) .
[Mark] :
places asterisk beside each line number that has values specified in [Mark] line .
[Show] : shows only those lines on screen that have values specified in [Show] line .
Line no .: inverse-video field can be changed to any line number in memory . Display window
will shift to area in memory which includes selected line .
Display Information : blanked while analyzer gathers states . If states are captured at a slow rate, top line
will show count of states still to be captured . Aftertrace complete, up to 16 lines of
state memory will be on screen . Every label defined in Format Specification will be
on screen (subject to max screen width) . Labels can be reordered by placing cursor
in the base field under a label and pressing blue SHIFT key plus LABEL right arrow
or left arrow key.
Roll Indicator: arrow(s) in upper right hand corner . Indicate whether display window can be
positioned up, down, left, or right by ROLL keys .
LabeI> ADDRS ADDR1 DATA
CNTRL WR-RD MEMRY
Base >
[Nark]/ abs 1/29281J2828]
XXXXX
-0008 BOOT +0433 0433 <STX>
0111 READ IM-OT
-0007 BOOT +0433
0433 w 011, READ IM-OT
-0006 BOOT +01 02 01D2 ( 0101 WRITE IM-OT
-0005 BOOT +01D5 01 D5
0 0
101
WRITE
IM-OT
-0004 BOOT +01DB 01DB 8
0101 WRITE IN-OT
-0003 BOOT +01DB 01DB <SOH> 0101 WRITE IN-OT
-0002 BOOT +01DB 01DB 1 0101 WRITE
IN-OT
-0001 BOOT +0429 0429 0
0111 READ IN-OT
+0000 BOOT +0429 0429 <DC3> 0111 READ IN-OT
+0001 BOOT +0431 0431 2 0111 READ
IN-OT
+0002 BOOT +0431 0431
u 0111 READ IN-OT
+0003 BOOT +0433 0433 <STX> 0111 READ
IN-OT
+0004
BOOT +0433 0433
W 0111 READ IN-OT
+0005 BOOT +01D2 01D2 ( 0101 WRITE
IN-OT
+0006 BOOT +01D5 01D5 <BS > 0101 WRITE
IN-OT
+0007 BOOT +01D8 01DB ( 0101 WRITE
IN-OT