Call Manager; Call Park - Toshiba IP EDGE Description

number, name (if provided), time and date of the call, and status of the call (answered,
abandoned, or redirected). This list is accessible by the user from the telephone LCD and
any call may be selected and redialed using the flexible
When calls ring a button (
stored on the telephone that is designated as the owner of the
phone that answers the call. If an incoming call is directed to a telephone, but the call is
not answered by that telephone because it hunts or forwards to another destination, the call
record is still stored on that telephone as "redirected" and on the telephone that answers
the call as "answered." If a call is not answered, it is stored on the line or DN owner's tele-
phone as "abandoned."
To store call records, a telephone must be allocated Call History memory by the System
Administrator.

Call Manager

The Call Manager features are covered in

Call Park

Call Park gives any station, regardless of type, a method for holding calls. By parking a
call, you are free to make other calls and retrieve the call at a later time or use the paging
system to announce a call to be picked up by someone else on the system. Any call can be
parked. Parking a call to your phone is known as Local Park, parking a call on someone
else's phone is known as Remote Park, and if a general orbit is used, it is called Auto Park.
Call Park Orbits
The Call Park feature enables a station user to place a call temporarily in an orbit so that
the call can be retrieved by any user, either from the same station or from a different sta-
tion. Personal Park Orbits are available to any type of telephone, including standard tele-
phones. If a call is parked, but not retrieved within a pre-programmed time period, it will
recall the parking telephone. The Park Recall timer is a system wide timer setting.
Park and Page
This feature enables station users to park a call (in a General or Personal Park Orbit), enter
a Page Zone or Group access code, and then announce the orbit number of the waiting call
to the Paged party. A pre-programmed One Touch button can be assigned to telephones to
automatically connect to a predesignated External Paging circuit, a Telephone Paging
group or both.
IPedge General Description
Line
or DN) that appears on multiple stations, the number is
04/13
Caller ID
Chapter 3 – Unified Communications.
Hist
or button.
Line
or DN and on the tele-
Features
Call Manager
57