Power/Volume Button Board - HP 10 G2 2301 Maintenance And Service Manual

Power/volume button board

Description
Power/volume button board ((includes cable)
Before removing the power/volume button board, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the battery (see
6. Remove the speaker (see
7. Remove the rear-facing webcamera (see
8. Remove the antenna board (see
9. Remove the touch screen board (see
Remove the power/volume button board:
▲ Disconnect the power/volume button board (1) from the system board and remove it.
Reverse this procedure to install the power/volume button board.
18 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Back cover on page 11).
Battery on page 13).
Speaker on page 14).
Rear-facing webcamera on page
Antenna board on page
Touch screen board and display cable on page
14).
16).
Spare part number
833752-001
17).