Standards; Idu Physical Description; Rear Panel; Figure 2: Canopy T1/E1 Multiplexer Rear Panel - Motorola Canopy T1/E1 User Manual

Canopy T1/E1 Multiplexer
1.2.2 Standards
The Canopy T1/E1 Multiplexer conforms to the following standards:
◦
G.703
◦
G.823
◦
G.824
◦
ANSI T1.403
1.2.3 IDU Physical Description
The unit provides a compact, simple to configure, and easily scalable solution for
transporting T1/E1 services over Canopy wireless Ethernet-based networks.
1.2.4 Rear Panel
Interface connections and the power port are located on the rear panel of the unit.
Issue 3
◦
◦
◦

Figure 2: Canopy T1/E1 Multiplexer rear panel

Page 11 of 73
T1/E1 Multiplexer FPGA Version 3.4
TR-AT&TG2411
IEEE 802.3
EMC Class A compliance – EN 55022 Class A
September 2004