Create Certificate - HP P2000 G3 Cli Reference Manual

create certificate

Description Creates or removes a custom security certificate.
The storage system supports use of unique certificates for secure data communications, to
authenticate that the expected storage systems are being managed. Use of authentication certificates
applies to the HTTPS protocol, which is used by the web server in each controller module.
After using this command you must restart the system's Management Controllers to have the change
take effect.
Syntax
create certificate
[unique]
[contents content-string]
[restore]
[noprompt]
One of the first three optional parameters must be supplied.
Parameters unique
Optional. A security certificate is generated based on the system's serial number and other standard
values. This certificate is installed, and the original certificate is archived.
contents content-string
Optional. A security certificate is generated based on the supplied content. The content becomes the
subject of the certificate creation request and must be formatted as
/type0=value0/type1=value1/type2=..., where types include CO for country, ST for state
or province, L for location, CN for common name, and O for organization. The content string cannot
exceed 100 characters and can include printable UTF-8 characters except space or semicolon. An
example is /CO=US/ST=CO/O=MyOrganization/CN=www.mysite.com. This certificate is
installed, and the original certificate is archived.
restore
Optional. The archived original certificate is restored and the custom certificate is discarded. The
custom certificate may have been created with this CLI command or uploaded using FTP.
noprompt
Optional in console format; required for XML API format. Suppresses the prompt to revert the
transaction if the command fails, which requires a yes or no response. If this parameter is specified
and the command fails, the transaction is automatically reverted.
Example Create a custom certificate based on the system's serial number:
# create certificate unique
To make the certificate change take effect you must restart both Management
Controllers by entering "restart mc both". Press Enter to acknowledge this
message.
Success: Command completed successfully. - Security certificate generated.
(2012-10-04 09:31:40)
Create a custom certificate using a content string:
# create certificate contents /CO=US/ST=CO/L=NewYork/O=MyCompany/CN=
www.mycompany.com
To make the certificate change take effect you must restart both Management
Controllers by entering "restart mc both". Press Enter to acknowledge this
message.
Success: Command completed successfully. - Security certificate generated.
(2012-10-04 09:31:49)
HP P2000 G3 MSA System CLI Reference Guide 45