Table of Contents
Advertisement
Importing Logo Files
5
Press the ENTER button.
6
Press the MENU button to close the menu.
Note
The imported graphics file can be used in "Using the Downstream Key (DSK)
Function To Add Text or an Image" (page 90), "Using Luminance Keying" (page
99), or "Using Chroma Keying" (page 103).
By importing a logo file to the internal hard disk, you can display an image (logo)
for the purpose of copyright protection.
1
Insert the "Memory Stick" or USB flash memory holding the logo file in the
"Memory Stick" slot or USB connector in the side panel.
Caution
• Use a "Memory Stick" or USB flash memory that has been formatted using
this unit.
• The logo file must have been placed in the designated folder MSSONY/
PRO/LPS/ANYCAST/LOGO for logo files.
For details of formatting a "Memory Stick," see "Formatting a "Memory
Stick"" (page 243), and for details of formatting a USB flash memory, see
"Formatting a USB Flash Memory" (page 245).
2
Press the MENU button.
3
In the top menu, select [File Manager].
4
1 Select [Import Logo File], and confirm; 2 select [Memory Stick], [USB
Flash Memory 1], or [USB Flash Memory 2], and confirm; 3 select the logo
file to be imported, and confirm.
The upper USB connector is number 1, and the lower connector is number 2.
1
Memory Stick
Delete
USB Flash Memory 1
Disconnect
USB Flash Memory 2
Recover
Rename
Convert AVI
Export EDL Type 1
Export EDL Type 2
Export VOD File
Export Job
Import Job
Import CG File
Import Logo File
Note
If you select [All] in step 3, all of the files are imported. If files of the same
name already exist on the internal hard disk when importing all files, an
overwrite confirmation message appears. When you want to overwrite all of
the existing files with the same name, press the ENTER button while holding
down the SHIFT button. When you want to skip all of the files with the same
2
3
All
xxxxxxxxxx.bmp
xxxxxxxxxx.bmp
xxxxxxxxxx.bmp
xxxxxxxxxx.bmp
Importing, Renaming, and Deleting Files
237
Advertisement
Table of Contents
