Exporting a file
By exporting a file created in the Text Typing Tool software to a "Memory Stick"
or USB flash memory, you can use the file in another system.
You can export the file in TIFF format or TARGA format at 1,280×960 (4:3) or
1,706×960 (16:9) size.
1
Insert the "Memory Stick" or USB flash memory in the side panel "Memory
Stick" slot or USB connector.
The upper USB connector is number 1, and the lower connector is number 2.
"Memory Stick" slot
FACTORY USE
8
1
15
9
RGB
(
GUI
)
RESET
2
Open the file to be exported.
For the method of opening a file see "Opening an existing file" (page 125).
3
In the file operation section, click the [Export TIFF...] button, or [Export
TGA...] button.
The following confirmation message appears.
4
Select where to save the file, and click [Enter].
The following confirmation message appears.
5
If the opened file includes multiple sheets, select either [all sheets] or
[current sheet].
[all sheets]: Exports all sheets within the file.
[current sheets]: Exports the currently displayed sheet only.
Note
If there is only one sheet in the file, this message does not appear.
REMOTE
NETWORK
5
1
USB
USB connector
Creating a Title Graphic With the Text Typing Tool
129