Buttons - Siemens CMTC1515 User Manual

6.2

Buttons

1
Siemens Building Technologies
Fire Safety & Security Products
2 3
1 R.C. Receiver: (CMTC1915 only)
This lens is the remote control receiver window, do not block this window when using the
remote control.
2 Menu/Exit
Enters the OSD adjustment main menu. This button is also used to return to the previous
menu or submenu.
This button is also used to exit the OSD main menu when the main menu is displayed
on the screen.
3 Source/Enter
This button is used to select the input source when the OSD is off. The input changes must
be made in the following order: AV1, AV2, S-VIDEO, DVI, PC, AV1....
This button is also used to confirm the current selection when the OSD is on.
▼/- (Adjust down)
4
This button is used to scroll through the screen containing items to be adjusted, or to
decrease the value of the item to be adjusted.
▲/+ (Adjust up)
5
This button is used to scroll through the screen containing items to be adjusted, or to
increase the value of the item to be adjusted.
6 Power Switch
Press once to turn the power on, and press again to turn the power off.
7 Power LED
If the LED indicator lamp is green, the unit is in normal operating mode. When DVI and PC
input source applications are being used, the LED indicator lamp will change to orange
when it is in power-saving mode.
4 5
Connection and Buttons
6 7
17
01.2006