Compliance Information For The U.s.a; Fcc Warning; Ce Conformity For Europe - Siemens CMTC1515 User Manual

Standards and Guidelines
3.2

Compliance Information for the U.S.A.

3.3

FCC Warning

3.4

CE Conformity for Europe

10
Siemens Building Technologies
Fire Safety & Security Products
The equipment has been tested and found to comply with the requirements for a
Class B digital device, pursuant to part 15 of the FCC Rules. These requirements
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by taking one or more of the
following measures:
Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consulting the dealer or an experienced radio/TV technician for help.
To ensure continued FCC compliance, the user must use a grounded power supply
cord and the shielded video interface cable with bonded ferrite cores provided. If a
BNC cable is going to be used, use only a shielded BNC (5) cable. Also, any
unauthorized changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this device.
The device complies with the requirements of the ECC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to "Electromagnetic
compatibility", and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to
"Safety".
01.2006