6. Select Head Cleaning.
7. Press the
cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
When the cleaning cycle is finished, you see a message on the LCD screen.
8. Select Print nozzle check pattern and press the
that the print head is clean.
If you don't see any improvement after cleaning the print head up to 2 times, turn the product off and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink
cartridges may be old or damaged and needs to be replaced.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Loading Paper in Cassette 2 (Lower Cassette)
Related topics
Replacing Ink Cartridges
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows computer or Mac.
Start button to clean the print head. You see a message on the LCD screen during the
Print Head Cleaning
Start button to run a nozzle check and confirm
311