Section 4 - Configuration
This screen allows you to save and restore the camera's current
configuration. You can also reset all settings to the factory default
or reboot the device.
Click on the Save Configuration button to
Save to Local
Hard Drive:
save the current configuration to your hard
drive.
Load from Local
To load a saved configuration, click on the
Hard Drive:
Browse button to select a configuration file
from your hard drive. Then, click the Load
Configuration button to load the new
configuration.
Restore
Click this button to reset all settings to their
to Factory
factory defaults. If you select to reset your
Defaults:
settings, you will need to set up your camera
again.
Reboot Device:
Clicking the Reboot button will reboot your
device.
D-Link DCS-5222L User Manual
System
53