Camera Control - D-Link DCS-5020L User Manual

Section 4 - Configuration
This section allows you to configure the pan and tilt operations of
your camera. You can specify the lens location for the Home button,
and specify up to 24 pre-set lens locations, allowing you to quickly
view these pre-determined areas of the camera's range from the Live
Video screen.
Set As Home: Click to set the current position as Home.
Default Home: Click to set the Home position with the default
setting.
Pan Step: Select the speed at which the camera will pan for
a full cycle from the drop-down list. Select a value
between 0 and 10, 0 being the slowest setting.
Tilt Step: Select the speed at which the camera will tilt for a
full cycle from the drop-down menu. Select a value
between 0 and 10, 0 being the slowest.
Preset Name: Enter a name for your camera location and click Add.
Select created presets from the drop-down menu.
Present If you want to delete an entry, select it and then
Position: click Delete.
To use the Auto Patrol feature, select the desired
Patrol preset positions from the Preset Locations list and
Selection: add them to the Patrol Positions list by clicking
Select. You can then select the order in which the
camera will patrol through the preset locations by
selecting a location and clicking Up or Down. Click
Remove to remove a location from the list.
Click Save when finished.
D-Link DCS-5222L User Manual

Camera Control

49