Table of Contents
Advertisement
Section 7: Configuring Your Device
Your HotSpot provides access to support and configuration
options. You can use your Wi-Fi HotSpot's Configuration tabs
to configure your device.
Configuration Tabs
Mobile HotSpot Configuration Page
1. Access the Web portal and select Configuration.
2. Select any of the available tabs and scroll down the
page to review the available information. The
Configuration page Web portal lists the following basic
status information and options:
Settings Tab
LTE Network
Caution! Unchecking this Mobile data feature will prevent
wirelessly connected devices from receiving any data
access to the Web. They will still remain connected
from the HotSpot, but not be getting any data.
•
Mobile data: If enabled, allows the device to use the mobile data
features of your plan to provide Internet access to connected
devices. Select from a list of available data networks. Choose
from and available option:
• LTE/GSM/WCDMA (default) is the default network mode
option. This selection allows the device to choose the fastest
connection from among the available connection speeds,
including LTE.
• GSM/WCDMA provides access to either the 2G or 3G network.
• LTE only restricts your connection only to the LTE network.
• WCDMA only restricts your connection to only the 3G network.
• GSM only restricts your connection to only the 2G network.
Configuring Your Device
37
Advertisement
Table of Contents
