Table of Contents
Advertisement
Section 5: Network Page
Your HotSpot provides a wireless Local Area Network (LAN)
that can share access to the 4G or 3G data network. You can
use your Wi-Fi HotSpot's Network pages to configure your
wireless LAN.
Mobile HotSpot Network Page
1. Access the Web portal and select Network.
2. Scroll down the page to review the available
information. The Network page Web portal lists the
following basic status information and options:
Network
Your Wi-Fi HotSpot is preconfigured to use private IP
addresses on the WAN side, and to act as a DHCP server.
The router's default WAN IP configuration is:
•
IP address: 192.168.43.1 (default)
This is the LAN WAN IP address of the router.
•
Subnet mask: 255.255.255.0
This is the LAN WAN Subnet Mask of the Mobile HotSpot router.
Combined with the IP address, the IP Subnet Mask allows a
device to know which other addresses are local to it, and which
must be reached through a gateway or other router.
Note: These addresses are part of a private address range for
use in private networks, and should be suitable in most
applications. If your network has a requirement to use a
different IP addressing scheme, you can make those
changes in this menu.
•
MAC Address (display only): Displays the device MAC address.
Network Page
27
Advertisement
Table of Contents
