Sec 2: 8-12
8.7.2
Removal of the Speaker Module (B)
1. Remove the top two screws (23) as shown in
Port Seal (20)
2. Carefully pick out the Speaker Module (18) with the Black Stick and swing it out of the
Main Chassis Assembly (K) as shown in
Figure 8-14. Remove Top Screws
Port Seal (20)
Figure 8-15. Remove Speaker Module
Be careful not to damage the speaker cone or the Port Seal (20)
during the disassembly process.
This Module has lubricant on the seal and can be contaminated
with foreign material. Any foreign material can put the radio's
submergibility at risk.
Disassembly/Reassembly Procedures: Radio Disassembly
Figure 8-14.
Top Screws (23)
Speaker Cone
Figure 8-15.
Speaker Cone