Samsung SPE-400 User Manual page 80

setup screen
Date & Time
1. From the Setup menu, select the
<System (
2. Click <Date & Time>.
3. Specify the time and date that will be
applied to the encoder.
 Current system time : Displays the
current time settings of your system.
 Timezone : Specify the local time
zone based on the GMT.
 Use daylight saving time :
If checked, the time will be set one
hour before the local time zone for
the specified time period.
This option will be displayed only in
areas where DST is applied.
 System time setup : Specify the time and date that will be applied to your system.
- Manual : Specify the time manually.
- Synchronize with NTP server : Sync with the time of the specified server address.
- Synchronize with PC viewer : Sets to the time of the computer connected.
4. When done, click [Apply (

J
If you select the <Synchronize with PC viewer>, the standard timezone should be set the same
as the current timezone in PC.

The time setting for each of 4 channels should be specified separately.
If you want to perform the time sync, select Synchronize with NTP server or Synchronize with PC
viewer.
80_ setup screen
)> tab.
)].