Menu Sections - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
with 3G/CDMA/LTE Support and USB Port
User Manual
The web-based interface of the router is multilingual. If you need to select another language for the
web-based interface, place the mouse pointer over the English caption in the top part of the page
and select a language from the menu displayed.
Figure 19. Changing the language of the web-based interface.
The Home / Information page displays general information on the router and its software. From
the page you can quickly get to some pages of the web-based interface.
To upgrade the firmware of the router, left-click the current firmware version (the right column of
the Firmware version line) and follow the dialog box appeared.
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the router's local interface parameters, left-click the IPv4, IPv6 or MAC address of the local
interface (the right column of the lines LAN IPv4, LAN IPv6, or LAN MAC correspondingly).
After clicking the line, the page for editing the LAN interface opens (for the detailed description of
the page, see the LAN section, page 125).
To configure the router's WLAN parameters, left-click the SSID of the WLAN (the right column of
the SSID 2.4GHz or SSID 5GHz line). After clicking the line, the Wi-Fi / Basic settings page
for the relevant band opens (for the detailed description of the page, see the Basic Settings section,
page 129).
To proceed to the page for configuring the Yandex.DNS web content filtering service, left-click the
name of the internet protection by Yandex section. Also you can enable/disable the service or
change the default mode directly from the general information page.

Menu Sections

To configure the router use the menu in the left part of the page.
The Monitoring section provides an interactive scheme which illustrates the router's settings and
the LAN structure.
In the Home section you can run the needed Wizard.
To configure connection to the Internet, go to the Click'n'Connect page (for the detailed
description of the Wizard, see the Click'n'Connect section, page 43).
Page 34 of 220
Installation and Connection