Additional Settings - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
with 3G/CDMA/LTE Support and USB Port
User Manual

Additional Settings

On pages of the Wi-Fi / Additional settings section, you can define additional parameters for the
WLAN of the router. To configure the 2.4GHz band or 5GHz band, proceed to the relevant page.
!
Changing parameters presented on this page may negatively affect your WLAN!
The following fields are available on the page:
Parameter
Station Keep Alive
Beacon Period
RTS Threshold
Frag Threshold
DTIM Period
Figure 120. Additional settings of the WLAN.
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
Page 145 of 220
Configuring via Web-based Interface
Description