Table of Contents
Advertisement
Section B - Replacement of parts
7.0 HOW TO REPLACE THE THERMOSTAT
1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove the appliance from the cabinet. (Section 3.0)
4. Proceed from steps 4 to 6 under section 3.0 to have
access to the thermostat.
5. There is 2 different thermostats.
6. Remove the 2 screws first. (Figure 8)
7. Disconnect the 2 wires. (Figure 9)
8. Replace the defective thermostat and reassemble in
reverse order.
8.0 HOW TO REPLACE THE WARMER DRAWER CONTROL
1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove the appliance from the cabinet. (Section 3.0)
4. Remove the screw on the right side of the appliance to
have access to the drawer control. (Figure 10)
9
Figure 8
Figure 9
Figure 10
Advertisement
Table of Contents
