Section B - Replacement Of Parts; How To Remove The Drawer From The Drawer Cavity; How To Reinstall The Drawer; How To Remove The Appliance From The Cabinet - Electrolux 318202107 Service Manual

6

Section B - Replacement of parts

1.0 HOW TO REMOVE THE DRAWER FROM THE DRAWER CAVITY

Figure 1

2.0 HOW TO REINSTALL THE DRAWER

1. Align the glide latches on both sides of the drawer with slots on the drawer.
2. Push the drawer back in until you heard two clicks which will indicate that
the drawer is well installed.

3.0 HOW TO REMOVE THE APPLIANCE FROM THE CABINET

1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove the 2 screws securing the warmer drawer to the cabinet.
4. Pull out the appliance from the cabinet.
1. Disconnect Warmer Drawer from electrical supply.
2. Make sure the drawer is COOL. Open the drawer to the
fully opened position
3. Locate the latches on both sides of the warmer drawer.
Push at the same time on both latches while pulling the
drawer out. (Figure 1)