Table of Contents
Advertisement
INTERRUPT· Se1.1INTERRUPTCONDtTION TABLE 3·1.
READY, Indicates data set is ready for reception of
data. Held off if INTERRUPT tamp is on.
1200 Printer Only ' .
U~ed
as lainp self test. When
pressed, all lamps should light. The FORM FEED and
LINE FEED pushbuttons do not have lamps.
MOTOR OFF· Lights when pressed.'Turns
motor off hut leaves electronics turned' on.
ALARM· The ALARM lamp lights when the foltowing alarm condition occurs (remains
on until the alarm condition has been corrected):
low paper or paper out
Paper shield up (not on forms tractor model)
Problem
in
Printer
Also,
when the ALARM lights, the following occurs:
An Alarm tone sounds
An Interrupt or Break is automatically transmitted to alert the other end of the
tine
Motor turns off
The following are alarm conditions that do not light the ALARM lamp but sound the
Alarm tone, cause an Interrupt or Break to be transmitted (SR Printer only}, and turn off
th•e motor,
Cover up (300 Printer only}
Undervoltage to Printer
Print belt underspeed
When the Alarm condition is corrected, MOTOR ON must be pressed to start the motor.
Figure 3-2. Switches and Indicators, RO and SR Printers
PTR-4010
Set on
::1::.
single
H~e-fcied.
Set on 2 , double ltne-feed,
0
"O
Cl)
OJ
..+
5·
::s
Advertisement
Table of Contents
