Table of Contents
Advertisement
LOCAL · Lights whep prnssed, Starts motor and
onables' local Printer operation but does not al.low the
transmission or reception of data.
STANDBY
~
· Ughts when pressed.
Tums
motor oft
but leaves electronics
i\.lmed
on which enables the
transmission and reception of data.
ON UNE •
Lights When pressed. Tums Printer motor
on .arid enable~. the transmission and reception of
data.
READY· Indicates data set
Is
ready
for
transmission.
Held
ofl
!f INTER.RUPT lamp
is
on .
. 1200
Printer only - Used as farnp self test.
When· pre$sed, all lamps should light. The
HERE lS pushbutton ·does· not have a lamp.
ALARM • The ALARM lamp lights when the following alarm conditions occur (remains
on until the alarm condition has been corrected):
Low paper or paper out
Paper Shield up {not on forms tractor model)
Paper punch out of paper or end of magnetic tape in "Write" mode if in optional
ASR configuration.
Problem in the Printer.
Also, when the ALARM lamp lights, the following occurs:
An Alarm tone sounds
An Interrupt or Break is automatically transmitted to alert the other end of the
line
(if
on line)
The motor turns off
The following are alarm conditions that do not light the ALARM lamp but sounds the
Alarm tone, causes an Interrupt or Break to be transmitted, and turns off the motor.
Cover up
(300
Printers only)
Undervoltage to Printer.
Print belt underspeed.
ALL CAPS · When placed in the ON position,
all
alphabetic printing caused by the keyboard only will
be upper case.
AUTO LF. ·When in the ON position, the
paper is
advanced automatically when the RETURN key
fa
pressed. (Has no effect on incomfng data.)
PKM-4011
Figure 3-1. Switches and Indicators, KSR Printer
G)
m
A
w
(J)
-
C J1
0
Advertisement
Table of Contents
