Table of Contents
Advertisement
Carephone 62
Write settings from the Carephone 62 to the microSD memory
card:
Function
Write factory settings
Write user settings
Write the event history: the last
500 events within the Carephone
62 are copied into a file on the
microSD memory card.
In all cases, the unit beeps and the corresponding settings are
copied into a file on the microSD memory card. When it has
finished, the unit beeps again and returns to standby.
7.6
GSM Module
7.6.1
Installation
Refer to the Section 5.3.4 GSM connection, page 18.
7.6.2
Update and check the GSM Module firmware
NOTICE!
Before updating the GSM Module firmware, make sure that the
Carephone contains the last version of the Carephone
firmware. You can update the GSM Module firmware on a
Carephone with the microSD memory card.
NOTICE!
Make sure that the Carephone is connected to the mains with
the power supply unit. Before reading from the microSD
memory card, make sure that it contains a file.
–
–
–
–
TeleAlarm
Press P, F and 5 together for at least 2 seconds.
The Carephone beeps.
The Carephone reads the GSM Module firmware from a file
on the microSD memory card.
The Carephone beeps again and returns to standby.
Press together for at least 2 seconds:
P, D and 1
P, D and 2
P, D and 3
User Manual
Additional Devices | en
F.01U.141.162 | V6 | 2015.04
45
Advertisement
Table of Contents
