Table of Contents
Advertisement
Select an unassigned internal call number (11 -18) with [
5.
Step
[OK]. Successful registration is confirmed on the display.
by
Step
Registering the Gigaset 3000 Classic handset
Switch on the handset with a long press on the
1.
2.
Press
Enter the base station number, generally 1, and confirm with [OK]. The
3.
symbol initially flashes, but then remains steadily lit when the connection to
the base station has been established.
Enter the PIN of the base station (factory setting: 0000) and confirm with [OK].
4.
5.
Press the green illuminated key on the base station, the key flashes steadily.
Select an unassigned internal call number (11 -18). The handset is then
6.
successfully registered (the symbol indicating readiness for registration stops
flashing).
Registering the Gigaset 4000 Classic handset
1.
Press the green illuminated key on the base station, the key flashes steadily.
The base station is only ready for registration as long as the key flashes.
Switch on the handset with a long press on the
2.
3.
Confirm "Register?" with [YES].
Enter the system PIN of the base station (factory setting: 0000) and confirm
4.
with [OK].
The handset is registered. The next internal number is automatically assigned
to the Gigaset 4000 Classic handset.
Registering other devices
If you also wish to register other handsets (such as Gigaset 2000S or GAP
handsets) or cordless devices (such as Gigaset 1000 TAE or STA) please select
internal call numbers 11 to 15. These devices are not called on numbers
16 to 18.
Please refer to the relevant operating instructions for information on the
registration procedures.
A Gigaset repeater for increasing the range of the handsets does not require a
free registration location. You can register up to 6 Gigaset repeaters at a single
base station.
Deregistering devices
A cordless device can be deregistered from any registered Comfort handset
from Gigaset 2000 C on. All devices that remain registered retain their previous
internal call numbers.
Press
1.
Select using [
2.
Teiln.einrichten
This opens a list of internal numbers.
3.
Select using [
4.
Press [OK] to deregister the device with the chosen internal number.
18
z { ~
in sequence.
or *for selection menus.
] and [OK]:
Service
o
Gerät abmelden
]: (required internal number) .
€
key
.
C
key
o
or
Base Set up
Einstellungen
.
] and confirm with
o
Advertisement
Table of Contents
