Setting The Zoom Range (Zoom) - Sony UPX-C200 Operating Instructions Manual

Setting the Zoom Range (ZOOM)

The zoom range is set to 1.3× (f = 15.6 to 19.8 mm) at
the factory. This range can be changed to 2.6× (f = 7.50
to 19.8 mm) with the procedures below.
4
1
Set the PLAY/CAMERA switch to CAMERA.
2
Set the POWER switch to ON.
3
Press any button to turn off the Bluetooth display.
4
Press the MENU button.
The Menu display appears.
5
Select ZOOM by pressing v or V of the control
button.
6
Press ENTER of the control button.
The Zoom Range display appears.
7
Select f = 7.50 to 19.8 mm by pressing v of the
control button.
8
Press ENTER of the control button.
The Menu display is retrieved.
Note
When the built-in flash is used as the main lighting, it is
recommenced to use the factory-set zoom range (f =
15.6 - 19.8). If you use a zoom range of f = 7.50 - 19.8,
be sure to set the zoom to within the blue zone of the
zoom bar displayed on the LCD. If you shoot a subject
in the orange zone, sufficient lighting may not be
obtained around a subject.
36
Various Functions
1
2
P LA Y
C A M E
R A
W
T
M E N U
M O N IT
E N TE O TR
R
(P A L)
LC D
V ID E O
O U T
6,8 5,7