Yamaha DVD-S2500 Owner's Manual page 15

1Menu Language (see page 17)
You can select the language displayed in the On-screen
menu.
1 Go to [Menu Language] (Setup
Language) by using k n l h buttons on the remote
control, then press h.
Choices are displayed on the right column.
2 Select a language to be displayed in the On-screen menu
by using k n buttons.
3 Press l to return to the previous menu.
2Default Audio (see page 17)
You can select the audio language spoken in video discs.
Available choices are determined by the disc.
1 Go to [Default Audio] (Setup
Audio) by using k n l h buttons on the remote
control, then press h.
Choices are displayed on the right column.
2 Select a language by using k n buttons.
3 Press l to return to the previous menu.
3Default Sub-title (see page 17)
You can select the subtitle language set as default.
Available choices are determined by the disc.
1 Go to [Default Sub-title] (Setup
sub-title) by using k n l h buttons on the remote
control, then press h.
Choices are displayed on the right column.
2 Select a default subtitle language by using k n buttons.
3 Press l to return to the previous menu.
4TV shape (see page 15)
You can select the aspect ratio of the video displayed on
the TV monitor.
Select [Widescreen] if you connect to a wide-screen
monitor. If you connect to a conventional monitor,
select [4:3 panscan] (the left and right sides are trimmed
when you play 16:9 video) or [4:3 letterbox] (black
areas appear at the top and bottom when you play 16:9
video).
1 Go to [TV shape] (Setup
k n l h buttons on the remote control, then press h.
Choices are displayed on the right column.
2 Make a choice by using k n buttons.
3 Press l to return to the previous menu.
Language Menu
Language Default
Language Default
TV TV shape) by using
5Analog output (see page 16)
Enables you to specify the type of analog output suitable
for your AV receiver. Select [Multi-channel] if you are
using a multi-channel AV receiver with 6-ch discrete
inputs. If your AV receiver does not have 6-ch discrete
inputs, select one of [Stereo], [Dolby Surr Compat], or
[3D sound].
1 Go to [Analog output] (Setup
output) by using k n l h buttons on the remote
control, then press h.
Choices are displayed on the right column.
2 Select an item for the analog output signal by using k n
buttons.
3 Press l to return to the previous menu.
6Digital output (see page 16)
Enables you to specify the type of digital output suitable
for your AV receiver. Select [PCM only] if your AV
receiver is not capable of decoding multi-channel audio.
Select [All] if you connected this unit's digital out jacks
to a multi-channel AV receiver.
1 Go to [Digital output] (Setup
output) by using k n l h buttons on the remote
control, then press h.
Choices are displayed on the right column.
2 Select an item for the digital output signal by using k n
buttons.
3 Press l to return to the previous menu.
Notes:
– Press ON SCREEN again to exit from the On-screen
menu.
– You can find the selection of the helpful menu items
in [Preference] and [Setup].
Go to [Preference] if you want to customize this unit
for your personal requirement such as the Wake-up
timer.
Go to [Setup] if you want to set the operational status
of this unit.
Preparation
Audio Menu Analog
Audio Menu Digital
11