GE AL-1103 User Manual page 58

52 Alliance System
User Manual
Program a new time and date
To program a new time and date, do the following:
1. Press MENU*Figure 1), enter your user PIN
code and press ENTER Figure 1).
2. Enter 15 (for menu 15) and press ENTER.
The keypad displays the enter new date and
time window (Figure 73).
3. Enter 2 and press ENTER to set the time.
The display will show the current time and date
information held by the system.
4. Enter the correct hour (2 digits) and press
ENTER (Figure 74).
5. Enter the correct minutes (2 digits) and press
ENTER (Figure 75).
6. Enter the correct seconds (2 digits) and press
ENTER (Figure 76).
7. Enter the correct day (2 digits) and press
ENTER (Figure 77).
8. Enter the correct month (2 digits) and press
ENTER (Figure 78).
Figure 73. Program new date and time
Time 1-Display,2-Set,3-DST,4-Adjust
0-Exit, Menu:
Figure 74. Enter correct hours
Time&Date hh:mm:ss dd/mm/yy Xxx..
Hours:
Figure 75. Enter correct minutes
Time&Date hh:mm:ss dd/mm/yy Xxx..
Minutes:
Figure 76. Enter correct seconds
Time&Date hh:mm:ss dd/mm/yy Xxx..
Seconds:
Figure 77. Enter correct day
Time&Date hh:mm:ss dd/mm/yy Xxx..
Day:
Figure 78. Enter correct month
Time&Date hh:mm:ss dd/mm/yy Xxx..
Month: