Additional Information About Alarms - GE AL-1103 User Manual

20 Alliance System
User Manual
3. Enter the area number of the zone in alarm as indicated by a flashing LED and press ENTER (see
Figure 1 ).
4. Determine where the alarm occurred by reviewing the quick alarm history. See
on page 21.
5. Fix the problem.

Additional information about alarms

If the alarm conditions are no longer valid, and the alarm has been reset, you must contact your central station
company to ensure that they take no further action.
If you are unable to reset an alarm because of a faulty zone, refer to
page 38.
You can only reset an alarm for an area that is assigned to your PIN code. If you are unable to reset the alarm,
ensure that the flashing area LED is for an area you can disarm with your PIN code. If not, your attempt to reset
the alarm might result in your arming/disarming your system.
If you are unable to reset a system alarm because the conditions require a service technician, notify your alarm
company.
The system can be programmed so that certain alarms (such as tamper alarms) require a specific action from
your installer. "Engineer Reset Req" will appear on the display and a code will be shown. Give this information
to your installer.
List past alarm events
System menu option 10, Bypass zone on