Method 2] Switch The Mode On Sgx-Ca500 - Pioneer SGY-PM910H2 Installation Manual

2.2.2

[Method 2] Switch the mode on SGX-CA500

Go to the mode switching screen.
2.2.2.1 If the left and right sensors are checked, tap [Dual Power].
The mode switching completion screen opens.
In this state, the cyclocomputer is still not paired with the
sensor.
If the mode cannot be switched, refer to 2.1.7Add in the
sensor list of SGX-CA500.
When the mode is switched, the LEDs of the sensors light
orange for 10 seconds.
10