Normal Recording - Bosch RT30A Instruction Manual

High Density Video Cassette Recorder | Instruction Manual | Installation
Tape Remaining:
This function allows the time of the remaining tape to
be displayed during recording or playback.
1. Press the CLOCK/COUNTER button
until the remaining time displays on the
VCR indication panel.
2. Start recording or playback.

5.7 Normal Recording

Turn on the power of both the VCR and the
MONITOR.
1. Insert the VIDEO CASSETTE. Ensure the
safety tab is in place.
2. Press – or + to choose the desired
recording speed, 6H, 18H, 30H etc.
The selected time is displayed in the VCR indicator
panel, A6H > A18H > A30H > 48H > 72H > 120H >
168H > 240H > 480H > 960H > 000H.
Notes:
• If you select the '000H' option in normal recording,
the VCR will activate the '1SHOT REC' mode
function. This will record a single shot picture after
each defined time interval which is programmed in
the '1SHOT REC' menu (see 6.2 Record Mode Set
Up menu). You can select the '1SHOT REC' time
interval for 1 sec., 3 sec., 5 sec., 15 sec., 30 sec., 60
sec., or OFF.
• If you select '1SHOT REC' OFF, the unit will
record one picture each time the external 1SHOT
REC input is activated.
3. Press the REC button.
Recording will start. (The REC indicator will
light in VCR indicator panel.)
4. Press the STOP button to stop recording.
To PAUSE the recording during the
RECORDING mode:
1. Press the STILL button to pause the tape.
2. When you want to continue recording, press
the REC button again.
After 5 minutes in STILL mode, the recording
will automatically go into the standby mode to protect
the tape and the video heads.
Bosch Security Systems | 26 Feb 2003 | Draft
To Record Check during the RECORDING mode:
When in record mode, pressing the PLAY should
cause the unit to reproduce recently recorded video.
3. Press PLAY to reproduce recently recorded
video. (Playback of the last 4 seconds of
recorded video will be displayed).
After the Record Check, the unit returns to the original
recording mode.
EN | 14