Advertisement

Operating and Installation
Instructions
Fridge-Freezer Combination
KFN 9753 iD
en - CA, US
To prevent accidents
and machine damage
read these instructions
before installation or use.
M.-Nr. 09 307 970

Advertisement

Table of Contents
loading

Summary of Contents for Miele KFN 9753 iD

  • Page 1 Operating and Installation Instructions Fridge-Freezer Combination KFN 9753 iD en - CA, US To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 09 307 970...
  • Page 2: Installation Instructions

    Installation instructions To prevent accidents and machine damage read these instructions before installation or use.
  • Page 3: Caring For The Environment

    Caring for the environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing Old appliances contain materials that materials are biodegradable and can be recycled. Please contact your recyclable. Please recycle. local recycling center about the possibility of recycling these materials.
  • Page 4: Electrical Information

    If any changes are needed to the electrical connection of this appliance household wiring or power supply, this to the power supply, please consult a work must be performed by a qualified licensed electrician or call the Miele electrician. Technical Service. V 1-800-565-6435...
  • Page 5: Installation Site

    Installation Installation site Have the appliance installed by a The appliance should be installed in a qualified technician, according to dry, well-ventilated room. the enclosed installation instructions. Do not install the appliance: The manufacturer is not liable for - outdoors damage to property due to an - in an environment with dripping incorrect installation.
  • Page 6: Before Installation

    All necessary parts are included with the appliance or can be ordered from Miele. ^ Do not remove the spacers from the rear wall of the appliance. They ensure that there is enough space between the rear wall of the appliance and the wall.
  • Page 7: Installation Dimensions

    Installation Dimensions Freezer section height Niche height KFN 9753 iD 695 (27 3/8") 1772 - 1788 (69 3/4" - 70 3/8")
  • Page 8: Adjusting The Door Hinges

    Adjusting the door hinges The door hinges are pre-adjusted so that the appliance doors can be opened wide. By adjusting the hinges the doors' can be modified so they do not open as far. For example, when the door is opened if an adjacent wall or piece of furniture is in the way, the door angle should be limited to 90°.
  • Page 9 Adjusting the door hinges ^ Slightly loosen the fastening screws Before installing the appliance, you will e at the top, middle and bottom. need to decide which side of the door you would like hinged. For a ^ Slide the appliance doors outwards left-handed door hinge, follow the and unhinge them.
  • Page 10 Adjusting the door hinges Removing the door closing device ^ With its exterior facing downwards, place the appliance door on a stable surface. ^ Leave the hinges open and remove the screw in the mounting a. ^ Stand the appliance doors up Caution! When uninstalled, the door individually, and loosen the hinges on closing device will snap shut.
  • Page 11 Adjusting the door hinges ^ Hang the appliance doors on the Fastening the dampers pre-fitted screws and push the doors ^ With its exterior facing downwards, inward. again place the appliance door on a stable surface. ^ Screw the ball joint b of the door closing device c into the new fixing hole.
  • Page 12: Installing The Appliance

    The cabinetry corners KFN 9753 iD 31 lbs (14 27 lbs (12 have to be 90° angles, otherwise the cabinetry door will not be flush with all 4 corners of the cabinetry.
  • Page 13: Preparing The Appliance

    Installing the appliance ^ Push the appliance two-thirds of the Preparing the appliance way into the installation space. Ensure that the power cord does not get caught. For 16 mm cabinetry walls only: ^ Push the cover strip a (with the nubs facing downwards) into the central slot, and use the nubs to hook it into the keyhole slots b.
  • Page 14 Installing the appliance ^ Open the appliance doors. ^ Fit the cover k onto the mounting bracket l. ^ Using the screws m (M5 x 15), screw the mounting angle l onto the lower part of the appliance. ^ Pull the protective foil off of the piping ^ Use a flat-head screwdriver to strip n.
  • Page 15 Installing the appliance Installing the appliance For furniture with parts along the door hinge (such as nubs, seals, etc.) the installed dimensions of the hinge parts must be taken into account, so that a distance of 42 mm is maintained all the way around.
  • Page 16 Installing the appliance Securing the appliance to the space ^ Push the hinged side of the appliance to the cabinetry wall. ^ Slightly loosen the screws b on the upper and lower mounting brackets ^ To secure the appliance at the top and bottom to the cabinetry, screw the long particle board screwsa (4 x ^ Push the mounting brackets...
  • Page 17: Mounting The Cabinetry Doors

    Installing the appliance ^ Snap off the excess from the lower covere. It is no longer needed. ^ Fit the bracket cover g onto the lower mounting bracket c. ^ Close the appliance doors. Mounting the cabinetry doors. ^ With a pencil, draw a thin line on the centre of the inside of the cabinetry door.
  • Page 18 Installing the appliance Screw the appliance door and cabinetry door together: ^ Hang the cabinetry door on the adjustment bolts h. ^ Pre-drill the mounting holes a in the ^ Screw the nuts c loosely onto the appliance door, and screw in the adjustment bolts.
  • Page 19 Installing the appliance ^ Click each top cover i into place. ^ Click the side covers j into place. ^ Close both the doors and align them ^ Click the covers k on the sides into to the adjacent cabinetry doors. place.
  • Page 20 Installing the appliance Check the following to confirm that the appliance has been correctly installed: – The doors close properly. – The doors do not touch the cabinetry body. – The seal at the upper corner of the side with the handle contacts tightly. ^ To verify this, place a lighted flashlight in the appliance and close the appliance doors.
  • Page 21 Alteration rights reserved / 3812 M.-Nr. 09 307 970 / 01 KFN 9753 iD To obtain the most recent version of this guide, please visit the website of Miele.

Table of Contents