Miele KFN 9755 iDE Operating And Installation Instructions
Hide thumbs
Also See for KFN 9755 iDE:
- Operating and installation instructions (68 pages) ,
- Operating and installation instructions (64 pages) ,
- Operating and installation instructions (60 pages)
Related Manuals for Miele KFN 9755 iDE
Summary of Contents for Miele KFN 9755 iDE
- Page 1 Operating and Installation Instructions Fridge-Freezer Combination KFN 9755 iDE en - US, CA To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 07 938 590...
-
Page 2: Installation Instructions
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use. -
Page 3: Caring For The Environment
Caring for the environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing Old appliances contain materials that materials are biodegradable and can be recycled. Please contact your recyclable. Please recycle. local recycling center about the possibility of recycling these materials. -
Page 4: Connecting The Water Supply
Plumbing Connecting the water supply All plumbing work should be carried out by a suitably qualified and Before any installation or competent person, in accordance maintenance work is performed be with all applicable local and national sure the appliance is disconnected regulations. - Page 5 Plumbing ^ Open the water supply slowly and check the water system for leaks. ^ The appliance can now be connected to the electrical supply (see "Electrical connection"). Before using the appliance for the first time the water pipe should be purged of air by a qualified person.
-
Page 6: Electrical Connection
If there are any questions regarding the electrical connection of this appliance to the power supply, please consult a licensed electrician or call the Miele Technical Service. U1-800-999-1360 V1-800-565-6435... -
Page 7: Installation Site
Installation Ventilation Have the appliance installed by a The air at the rear wall of the appliance qualified technician, according to gets warm. Therefore sufficient space the enclosed installation instructions. must be provided around the appliance for ventilation. WARNING Air is taken in through the plinth of the This appliance is top-heavy and furniture housing unit. -
Page 8: Ventilation Grill
Installation Ventilation grill Before installation ^ Remove the cover strip, the sealing During construction the ventilation grill can be built-in. strip and other accessories from the inside and from the exterior rear wall of the appliance. ^ Do not remove the spacers from the ^ Cut an opening into the plinth b, as rear wall of the appliance. - Page 9 ^ Un-install the old hinges; they are no longer necessary, the custom door panel will be mounted on the appliance door. All necessary parts are included with the appliance or can be ordered from Miele.
- Page 10 Dimensions Freezer section height (A) Niche height (B) KFN 9755 iDE 27 3/8" 69 3/4" - 70 3/8" (695 mm) (1772 mm - 1788 mm)
-
Page 11: Adjusting The Door Hinges
Adjusting the door hinges The door hinges are pre-adjusted so that the appliance doors can be opened wide. However, if the opening angle of the door needs to be limited for any reason the hinges can be adjusted to accommodate this. For example, if the appliance door hits an adjacent wall when opened, the opening angle can be limited to 90°. - Page 12 Adjusting the door hinges ^ Slightly loosen the fastening screws Before installing the appliance, you will e at the top, middle and bottom. need to decide which side of the door you would like hinged. For and ^ Slide the appliance doors outwards left-handed door hinge, follow the and unhinge them.
- Page 13 Adjusting the door hinges Removing the door damper ^ With its exterior facing downwards, place the appliance door on a stable surface. ^ Carefully push the tension spring a outward with a screwdriver. ^ Stand the appliance doors up Caution! When uninstalled the door individually, and loosen the hinges on damper will snap shut.
- Page 14 Adjusting the door hinges ^ Hang the appliance doors on the Fastening the door damper pre-fitted screws and push the doors ^ With its exterior facing downwards, inward. again place the appliance door on a stable surface. ^ Screw the ball joint d of the door damper c to the new mounting hole.
-
Page 15: Installing The Appliance
Installing the appliance Installing the appliance into a All the installation instructions are for room divider a right-hinged appliance door. If If you wish to install the appliance in a you have converted the appliance room divider, the back of the installation door to hinge on the left, you will space must be fitted with a panel to need to adapt the instructions... -
Page 16: Preparing The Appliance
Installing the appliance ^ Push the appliance two-thirds of the Preparing the appliance way into the installation space. Ensure that the power cord does not get caught. For 5/8" (16 mm) cabinetry walls only: ^ Push the cover strip a (with the nubs facing downwards) into the central slot, and use the nubs to hook it into the keyhole slots b. - Page 17 Installing the appliance ^ Open the appliance doors. ^ Fit the cover k onto the mounting bracket l. ^ Using the screws m (M5 x 15), screw the mounting angle l onto the lower part of the appliance. ^ Pull the protective foil off of the piping ^ Use a flat-head screwdriver to strip n.
- Page 18 Installing the appliance Installing the appliance For furniture with parts along the door hinge (such as nubs, seals, etc.) the installed dimensions of the hinge parts must be taken into account, so that a distance of 42 mm is maintained all the way around.
- Page 19 Installing the appliance Securing the appliance to the space ^ Push the hinged side of the ^ Slightly loosen the screws b on the appliance to the cabinetry wall. upper and lower mounting brackets ^ To secure the appliance at the top and bottom to the cabinetry, screw the long particle board screws a ^ Push the mounting brackets c...
-
Page 20: Mounting The Cabinetry Doors
Installing the appliance ^ Snap off the excess from the lower cover e. It is no longer needed. ^ Fit the bracket cover g onto the lower mounting bracket c. ^ Close the appliance doors. Mounting the cabinetry doors ^ With a pencil, draw a thin line on the center of the inside of the cabinetry door. - Page 21 Installing the appliance Screw the appliance door and cabinetry door together: ^ Hang the cabinetry door on the adjustment bolts h. ^ Pre-drill the mounting holes a in the ^ Screw the nuts c loosely onto the appliance door, and screw in the adjustment bolts.
- Page 22 Installing the appliance ^ Click each top cover i into place. ^ Click the side covers j into place. ^ Close both the doors and align them ^ Click the covers k on the sides into to the adjacent cabinetry doors. place.
- Page 23 Installing the appliance Check the following to confirm that the appliance has been correctly installed: – The doors close properly. – The doors do not touch the cabinetry body. – The seal at the upper corner of the side with the handle contacts tightly. ^ To verify this, place a lighted flashlight in the appliance and close the appliance doors.
- Page 24 Alteration rights reserved / 3611 M.-Nr. 07 938 590 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.