Advertisement
5. Apply the head directly to your skin and move it slowly. (Fig. 6)
The mode indicator lamp will light, and the product will start to vibrate.
Use this product within approximate 5 minutes.
After 5 minutes have elapsed, the product will stop automatically.
CAUTION
The device will not vibrate unless you apply the head to your skin while touching
the side plate. (Skin sensing function)
If the head is not vibrating, the product is not working.
Power will be automatically turned off if device is unused for 30 seconds.
(Auto-off function)
Apply head from center to the out side of your face.
Do not keep the head on the same part of your skin, but move it
around. (Cause of skin trouble or poor health condition)
Do not use this device on the same part of your skin for more than 10 seconds.
If you feel slight current stimulation (a tingling sensation) during use, press the
level selector button to set the "LOW" level.
6. An automatic stop is made when around 5 minutes have elapsed. (Auto-off function)
You will know the automatic stop with the ending sound.
7. After use, make sure to pull out the power adaptor from the outlet. (Fig.7)
For continued use of the next mode, keep the power adaptor connected.
8. Wipe the toner off the head and main body with tissue, etc.
Step 3
"MOISTURIZE"
This mode is to give moisturizing care by making the moisturizing ingredients of the toner
permeate your skin.
1. Attach a new cotton puff to the main body, and fix it with the ring.
For attaching a cotton puff, see "Preparation for use."
2. Saturate the cotton puff with your regular toner.
Do not use a milky lotion or gel. Saturate the cotton puff with the toner until it
seeps through the cotton puff to the rear side.
3. Check that the power adaptor is connected to the main body, and press the power switch.
(Fig.10)
The "LOW" level indicator lamp will light, and the "MOISTURIZE" mode indicator
lamp will flash. If another mode indicator lamp flashes, press the mode selector
button to switch the mode.
If the power switch is pressed after the end of the "MICRO-PAT" mode, the
"MOISTURIZE" mode is set automatically.
4. Select the power level ("HIGH" or "LOW") with the level selector button.
Select the power level ("HIGH" or "LOW") with the level selector button
according to your skin condition.
Every time the level selector button is pressed, the potential power level is
switched between "HIGH" and "LOW". The vibration power does not change.
Use at the "LOW" level is recommended for people who use this product for the
first time and who feel something unusual.
5. Hold the main body by the side plate. (Fig. 5)
Make sure to hold the body with your hand touching either of the right and left side
plates.
6. Apply the cotton puff to your skin and move the product slowly. (Fig. 6)
The mode indicator lamp will light, and the product will start to vibrate.
Use this product within approximate 5 minutes.
After 5 minutes have elapsed, the product will stop automatically.
CAUTION
The device will not vibrate unless you apply the cotton puff to your skin while
touching the side plate. (Skin sensing function)
If the head is not vibrating, the product is not working.
Power will be automatically turned off if device is unused for 30 seconds.
(Auto-off function)
Apply head from center to the out side of your face.
Do not keep the cotton puff on the same part of your skin, but
move it around. (Cause of skin trouble or poor health condition)
If the moisture in the cotton puff becomes insufficient or if it is hard to slide, add more
toner.
Do not use this device on the same part of your skin for more than 10 seconds.
If you feel slight current stimulation (a tingling sensation) during use, press the
level selector button to set the "LOW" level.
If you still feel a "tingling sensation," add more toner.
7. An automatic stop is made when around 5 minutes have elapsed. (Auto-off function)
You will know the automatic stop with the ending sound.
8. After use, make sure to pull out the power adaptor from the outlet. (Fig. 7)
For continued use of the next mode, keep the power adaptor connected.
9. Remove the ring and the cotton puff.
Wipe off the surface of the head with tissue, etc.
Do not use the cotton puff again once it is used because its reuse will cause
skin trouble.
Step 4
"COOL-AESTHETIC"
This mode tighten the pores of your skin by a fresh cooling effect as the head section
surface is approximately 10
lower than the ambient temperature.
Use at an ambient temperature in the range of 10 to 40 .
(Cause of skin damage as the head is too cold if the device is used
at a lower temperature)
1. Remove the cotton puff, and wipe the toner off the head section.
2. Check that the power adaptor is connected to the main body, and press the power
switch. (Fig.11)
The level indicator lamp will go out, and the "COOL-AESTHETIC" mode indicator
lamp will flash. If another mode indicator lamp flashes, press the mode selector
button to switch the mode.
If the power switch is pressed after the end of the "MOISTURIZE" mode, the
"COOL-AESTHETIC" mode is set automatically.
Advertisement
