Troubleshooting - Panasonic KX-A406 Installation Manual

3. Linking to Digital Cordless Phones

Troubleshooting

Problem
The repeater does not work.
While talking using the handset, sound
cuts in and out.
A repeating tone is heard while talking
using the handset.
or
The STATUS indicator is amber and
the RSSI/ID indicator flashes green.
28
R When the indicators do not turn on, the AC adaptor is not
connected properly. Check the connections.
R When the indicators do not turn green, move the repeater
closer to the base unit.
R Registration may have been canceled.
Deregister the repeater, then re-register.
Deregister
1
Unplug the AC adaptor, then press and hold the
PROGRAM button.
2
While pressing and holding the PROGRAM button,
re-connect the AC adaptor.
3
Keep pressing and holding the PROGRAM button for
about 10 seconds until the STATUS indicator stops
flashing and RSSI/ID indicator turns red. Then release
the PROGRAM button.
R The STATUS indicator and the RSSI/ID indicator turn
amber for about 2 seconds and the STATUS indicator
flashes red again.
R If the STATUS indicator flashes green after releasing the
PROGRAM button, deregistration failed. Deregister the
repeater again.
Re-register
Unplug the AC adaptor, then perform from step 2 of
"Installation/Registering the Repeater".
R The handset is out of range. Move the handset closer to
the repeater.
R The PROGRAM button was pressed. The repeater is in
programming mode. To exit, press the PROGRAM button
again. Do not press the PROGRAM button, except when
deregistering the repeater.
Cause/solution