Sony CPD-L181 Service Manual
Sony CPD-L181 Service Manual

Sony CPD-L181 Service Manual

Tft lcd color computer display
Hide thumbs Also See for CPD-L181:

Advertisement

Quick Links

SERVICE MANUAL

LCD panel
Input signal format
Pixel efficiency
Resolution
Power requirements
Power consumption
Dimensions (w/h/d)
Mass
Plug & Play
Supplied accessories
MICROFILM
http://cxema.ru
SPECIFICATIONS
Panel type: a-Si TFT Active Matrix
Picture size: 18.1 inches (46 cm)
RGB operating frequency*
fh: 30 – 92 kHz
fv: 48 – 85 Hz
99.99 %
H: max. 1280 dots
V: max. 1024 lines
AC 100 – 240 V, 50 – 60 Hz,
1.0 – 0.6 A
Max. 48 W
Including the stand:
Approx. 468 × 422 × 207.5 mm
× 16
× 8
1
5
1
(18
/
/
/
in.)
2
8
4
Monitor only:
Approx. 468 × 354.5 × 90 mm
× 14 × 3
1
5
(18
/
/
in.)
2
8
Approx. 9 kg (19 lb 14 oz)
including the stand
DDC/DDC2B/DDC2Bi
See page 6.
TFT LCD COLOR COMPUTER DISPLAY
CPD-L181
Canadian Model
Chassis No. SCC-G25E-A
* Recommended horizontal and vertical timing
conditions
Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec., whichever is larger.
Horizontal blanking width should be more than 2.5 µsec.
Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without
notice.
...1/...2 pin assignment
5 4 3 2 1
10
9
8
7
15
14
13
12
11
Pin No.
Signal
Pin No.
1
Red
8
2
Green
9
(Composite Sync
10
on Green)
11
3
Blue
12
4
ID (Ground)
13
5
DDC Ground*
14
6
Red Ground
7
Green Ground
15
* Display Data Channel (DDC) Standard of VESA
US Model
AEP Model
6
Signal
Blue Ground
DDC + 5V*
Ground
ID (Ground)
Bi-Directional
Data (SDA)*
H. Sync
V. Sync
Data Clock (SCL)*

Advertisement

Table of Contents
loading

Summary of Contents for Sony CPD-L181

  • Page 1: Service Manual

    CPD-L181 SERVICE MANUAL US Model Canadian Model AEP Model Chassis No. SCC-G25E-A SPECIFICATIONS * Recommended horizontal and vertical timing LCD panel Panel type: a-Si TFT Active Matrix conditions Picture size: 18.1 inches (46 cm) Horizontal sync width duty should be more than 4.8% of total...
  • Page 2: Power Led

    CPD-L181 DIAGNOSIS Failure Power LED Aging Blink Amber (On 0.5 sec, Off 0.5 sec) ..Blink Green (On 0.5 sec, Off 0.5 sec) Out of Scan Range On Green *Aging mode ........... Press MENU key for longer than 5 second.
  • Page 3 CPD-L181 PRIMARY MODE MODE AT PRODUCTION MODE 8 MODE 9 MODE 10 MODE 11 MODE 12 MODE 13 MODE 14 MODE 15 RESOLUTION 800 X 600 800 X 600 800 X 600 800 X 600 800 X 600 848 X 480...
  • Page 4 CPD-L181 PRIMARY MODE MODE AT PRODUCTION MODE 24 MODE 25 MODE 26 MODE 27 MODE 28 MODE 29 MODE 30 MODE 31 RESOLUTION 1152 X 900 1170 X 584 1024 X 800 1280 X 960 1280 X 960 1280 X 1024...
  • Page 5 VIEWS AND IN THE PARTS LIST ARE CRITICAL FOR Parts on Set SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS AP- PEAR AS SHOWN IN THIS MANUAL OR IN SUPPLE- MENTS PUBLISHED BY SONY. CIRCUIT ADJUST- MENTS THAT ARE CRITICAL FOR SAFE OPERATION 0.15 µ...
  • Page 6: Table Of Contents

    CPD-L181 TABLE OF CONTENTS Section Title Page 1. GENERAL ..............1-1 2. DISASSEMBLY 2-1. Cabinet Assy and shield Removal ...... 2-1 2-2. A Board, G Board and DC-AC Inverter Unit Removal ......2-1 2-3. J Board Removal ..........2-2 2-4.
  • Page 7 http://cxema.ru...
  • Page 8 http://cxema.ru...
  • Page 9 http://cxema.ru...
  • Page 10 http://cxema.ru...
  • Page 11 http://cxema.ru...
  • Page 12 http://cxema.ru...
  • Page 13 http://cxema.ru...
  • Page 14 http://cxema.ru...
  • Page 15: Disassembly

    CPD-L181 SECTION 2 DISASSEMBLY 2-1. CABINET ASSY AND SHIELD REMOVAL Six screws (+BVTP 4 x 16) Cabinet assy Ten screws Six screws (+BVTT 3 x 6) (+BVTT 3 x 6) Shield (B) Shield (A) Cushion 2-2. A BOARD, G BOARD AND DC-AC INVERTER UNIT REMOVAL...
  • Page 16: J Board Removal

    CPD-L181 2-3. J BOARD REMOVAL Screw (+BVTT 3 x 6) Four screws J board Cushion 2-4. LIQUID CRISTAL PANEL MODULE AND H BOARD REMOVAL Two screws (+P 3 x 3) Six screws CN1201 (+BVTP 4 x 16) Clamp Chassis assy...
  • Page 17: Lamp Unit Removal

    CPD-L181 2-5. LAMP UNIT REMOVAL Five screws (3 x 4) Four screws (2.6 x 16) Rear cover Lamp unit base Two hooks Two screws (3 x 4) Two hooks Lamp unit base * Confirm the connecter's side to not be come reverse when install.
  • Page 18: Adjustments

    CPD-L181 SECTION 3 ADJUSTMENTS Connect the personal computer, monitor, and signal generator as shown below, and control the monitor. Signal generator (VG-819, etc.) Computer for jig TO INPUT-1 TO REMOTE * Maintain the Aging mode for 30 to 60 minutes.
  • Page 19 CPD-L181 • Adjustment of factory preset mode (4) Make the signal 30IRE all white to check that it is within the specification. (5) Input a gray scale to check the picture quality. Repeat the following operations as many times as the num- (6) Conduct color save ( Select C with ALT + M ).
  • Page 20 http://cxema.ru...
  • Page 21 http://cxema.ru...
  • Page 22 http://cxema.ru...
  • Page 23 http://cxema.ru...
  • Page 24 http://cxema.ru...
  • Page 25 http://cxema.ru...
  • Page 26 http://cxema.ru...
  • Page 27 http://cxema.ru...
  • Page 28 http://cxema.ru...
  • Page 29 http://cxema.ru...
  • Page 30 http://cxema.ru...
  • Page 31 http://cxema.ru...
  • Page 32 http://cxema.ru...
  • Page 33 http://cxema.ru...
  • Page 34 http://cxema.ru...
  • Page 35 http://cxema.ru...
  • Page 36 http://cxema.ru...
  • Page 37 http://cxema.ru...
  • Page 38: Semiconductors

    4-5. SEMICONDUCTORS BA05SFP-E2 HD74HC123AFP M62352GP-75ED TC74LCX04FT(EL) MAX202CSE TC74LCX541FT(EL) TC74LCX08FT(EL) TC74VHC163FT(EL) 74VHC240MTCX TC74LCX125FT(EL) 74VHC221AMTCX TC74LCX74FT(EL) TC74VHCT04AFT(EL) TC74VHCT14AFT(EL) TC74VHC04FT(EL) TOP VIEW TC74VHC08FT(EL) 20 pin SOP TOP VIEW TC74VHC14FT(EL) 16 pin SOP BA7078AF-E2 TC74VHC125FT(EL) NJM79L05UA 74VHC14MTCX IP00C702 TOP VIEW V IN 18 pin SOP V OUT TOP VIEW TOP VIEW...
  • Page 39 DTA114TUA-T106 DTZ-TT11-12 D5S6M P6KE170AG23 DTC114EKA DTZ10B CATHODE DTC114GKA DTZ12 DTC114GKAT146 DTZ4.7C DTC114TUA-T106 MA111-TX 2SA1162-G RD5.6SB 2SA1611-M5M6 UDZ-TE-17-10B ANODE 2SB709A-QRS-TX UDZ-TE-17-4.7B 2SC1623-L5L6 UDZ-TE-17-5.6B RD6.8ES-B2 ERA34-10TP1 2SC2412K-T-146-QR UDZ-TE-17-6.8B 1SS119-25 RGP02-20EL-6394 2SC2712-YG 1SS355TE-17 11ES2 2SC3545-T43 CATHODE CATHODE ANODE CATHODE ANODE ANODE IRFPE50 D1FS4A-TA FCH20A10 IRFPF50 ANODE...
  • Page 40: Exploded Views

    4-047-474-01 FOOT, RUBBER 3-682-057-01 SPACER (SMALL) 4-071-365-01 LABEL, INFORMATION 1-763-357-11 FAN, DC 4-389-025-01 SCREW (M4) (EXT TOOTH WASHER) X-4036-670-1 REAR COVER ASSY, STAND 4-042-353-21 EMBLEM (NO. 7), SONY 1-418-466-11 INVERTER UNIT, DC-AC 1-517-910-11 LAMP UNIT * A-1298-857-A A BOARD, COMPLETE http://cxema.ru...
  • Page 41: Packing Materials

    CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la Replace only with part number specified. sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 42: Electrical Parts List

    CPD-L181 CPD-L181 ¡ The components identified by mark Les composants identifiés par une SECTION 6 ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce ELECTRICAL PARTS LIST portant le numéro spécifié.
  • Page 43 CPD-L181 ¡ Les composants identifiés par une The components identified by mark ¡ marque sont critiques pour la sécurité. are critical for safety. Ne les remplacer que par une pièce Replace only with part number specified. portant le numéro spécifié.
  • Page 44 CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 45 CPD-L181 ¡ Les composants identifiés par une The components identified by mark ¡ marque sont critiques pour la sécurité. are critical for safety. Ne les remplacer que par une pièce Replace only with part number specified. portant le numéro spécifié.
  • Page 46 CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 47 CPD-L181 ¡ Les composants identifiés par une The components identified by mark ¡ marque sont critiques pour la sécurité. are critical for safety. Ne les remplacer que par une pièce Replace only with part number specified. portant le numéro spécifié.
  • Page 48 CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 49 CPD-L181 ¡ Les composants identifiés par une The components identified by mark The components identified by [ in this manual ¡ marque sont critiques pour la sécurité. are critical for safety. have been carefully factory-selected for each set Ne les remplacer que par une pièce Replace only with part number specified.
  • Page 50 CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. (a)(g) Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 51 CPD-L181 ¡ Les composants identifiés par une The components identified by mark ¡ marque sont critiques pour la sécurité. are critical for safety. Ne les remplacer que par une pièce Replace only with part number specified. portant le numéro spécifié.
  • Page 52 CPD-L181 ¡ The components identified by mark Les composants identifiés par une ¡ are critical for safety. marque sont critiques pour la sécurité. (g)(h)(j) Replace only with part number specified. Ne les remplacer que par une pièce portant le numéro spécifié.
  • Page 53 CPD-L181 ¡ Les composants identifiés par une The components identified by mark ¡ marque sont critiques pour la sécurité. are critical for safety. Ne les remplacer que par une pièce Replace only with part number specified. portant le numéro spécifié.

Table of Contents