LG NC2000 Owner's Manual page 12

SuperSign Player SuperSign Player
Follow the steps below to setup network connections by using the wizard.
Select the network environment that you want to use to connect to SuperSign Manager and SuperSign
1
Player.
Note
● If the default gateway address and the subnet mask set to the SuperSign Manager are same as the
SuperSign Player, they are connected to the same network.
● Here is how to find the default gateway address and subnet mask set to your SuperSign Manager.
Go to the desktop of the server on which the SuperSign Manager is installed.
1. Click Start > Control Panel.
2. On the control panel, double-click Network Connections.
3. Right-click Local Area Connection.
4. Click Properties.
5. Select Internet Protocol (TCP/IP), and then click Properties.
6 < Internet Protocol (TCP/IP) Registration Information> dialog box appears.
7. Check the default gateway address and the subnet mask.
● For SuperSign Player network settings, see SuperSign Player Settings > Network Settings in this
document.
12
● Choose the LAN when the SuperSign Manger and the
SuperSign player are connected to the same network.
● Choose the WAN when the SuperSign Manger and the
SuperSign player are connected to the different networks.