LG NC2000 Owner's Manual page 11

SuperSign Player SuperSign Player
Server IP setting
In the Server IP setting you can set the IP of the PC (server) in which SuperSign Manager is installed.
It is set to Auto Setting by default.
Note
● Only IPv4 is supported in the player and the server IP settings.
● If you entered the IP manually, and the network is disconnected, check the IP address and try again.
Wizard Setting
SuperSign Solution now provides SuperSign Network Setup Wizard that guides you through the steps necessary
to configure network settings on your SuperSign Player and SuperSign Manager.
Attention
● Before continuing with the wizard, please make sure you already have a SuperSign Manager installed on
your server. If not, this wizard may not setup network connections correctly.
● With Auto Setting selected, the IP of the server using the
same network as the player will be automatically assigned.
● With Manual Setting selected, you can choose a specific
server IP.
● Click the Save button to save the settings.
11