Ô
General
Troubleshooting
Symptom
The picture does not appear on the
screen of your computer.
The picture quality obtained from a
Color Video Camera connected to a
computer is not good as that from a
Color Video Camera connected to a TV.
The unit cannot be operated when a
button on the Remote Commander is
pressed.
The unit cannot be operated at all.
Remedy
• Make sure the connections are made correctly.
• Test the Color Video Camera by connecting it to other
equipment such as a TV or video deck.
Depending on your computer or video capture board,
you may not be able to obtain the same picture quality
as that of a TV. Consult your computer manufacturer or
dealer for details.
• Press the CAMERA SELECT button whose number is
the same as the number to which the IR SELECT
switch of the camera is set.
• Replace the batteries of the Remote Commander with
new ones.
• Plug in the power cord to an AC outlet.
Pull out the plug of the power cord from the AC outlet, then
reinsert it into the AC outlet after a while. If you still cannot
operate the unit, set the BACKUP switch (at the rear of the
main unit) to OFF and disconnect and reconnect the power
cord from the AC outlet. (Note that the settings will be
erased when the BACKUP switch is set to OFF.)
47
Troubleshooting