Turning On The Power - Sony EVI-D100 Operating Instructions Manual

Notes
• You cannot connect your Color Video
Camera to a computer that is not equipped
with either video input or an S-Video
input jack. You might not be able to use
your existing computer with your Color
Video Camera unless you provide the
computer with a video capture board and/
or software. Consult your computer dealer
or manufacturer for details.
• Use only the AC power adaptor (MPA-
AC1) supplied with the unit. Do not use
any other AC power adaptor.
Polarity of the plug
42
Preparations

Turning on the Power

1
Connect the main unit to an AC outlet
using the supplied AC power adaptor
and power cord.
The POWER lamp lights up.
As long as the main unit is connected to
an AC outlet, you can turn the camera
on or off with the POWER switch on
the Remote Commander. (When you
turn the power off using the Remote
Commander, the POWER lamp turns off
and the STANDBY lamp lights up.)
When the power is turned on, the
camera will automatically face first
toward the upper left-hand side, and
then the front, which is the home
position of the camera. (Pan/tilt
reset action)
to AC outlet
2
Turn on the peripheral devices.
Lights up