Panasonic KX-NCP500 Feature Manual page 20

1.1.3 ARS (Automatic Route Selection)
Removed Number of Digits: There may be circumstances where the user-dialed number must be
modified in order for the carrier to connect the call. In this case, enter here the number of digits to be
removed automatically from the beginning of the dialed number.
Modify Command: When a call is made using this carrier, the telephone number must be modified to meet
the criteria required by the carrier in order to connect the call. Program here the commands needed to
modify the user-dialed number as necessary.
[Command Explanation]
Command
C Inserts the Carrier Access Code
H Inserts the user-dialed number minus any removed digits
P Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
A Inserts the Authorization Code for Tenant
G Inserts the Authorization Code for Trunk Group
I Inserts the Itemized Billing Code
[0-9, , #] You can enter any of these digits in a modify command
[Programming Example: Carrier Table]
Carrier Name
*1
Trunk Group *2
Carrier Access Code
Removed No. of Digits
Modify Command
In this example
Dialed number: 9-1-212-555-5555
Modification:
9
CO Line Access no. is ignored
® 10.6 [8-5] Carrier—Carrier—
*1
® [350] ARS Carrier Name
®10.6 [8-5] Carrier—TRG(Priority)
*2
® 10.6 [8-5] Carrier—TRG 01–TRG 64 (KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200), or TRG 01–TRG 96
(KX-TDE600)
®[351] ARS Trunk Group for Carrier Access
® 10.6 [8-5] Carrier—Carrier—
*3
® [353] ARS Carrier Access Code
® 10.6 [8-5] Carrier—Carrier—
*4
® [352] ARS Removed Number of Digits for Carrier Access
® 10.6 [8-5] Carrier—Carrier—
*5
6.
ARS Options
20 Feature Manual
Carrier 1 Carrier 2
Carrier A Carrier J
1, 2, 3
*3
0880 0700
*4 1
*5 CH CPH
1 2125555555
Remove 1 digit
Carrier Name
Carrier Access Code
Removed Number of Digits
Modify Command
Description
4
3
0880 2125555555
Add the Carrier Access Code
Document Version 2013-05