Sony FCB-EX2700P Technical Manual page 35

VISCA Command/Acknowledge Protocol
Command Command Message
General Command 81 01 04 38 02 FF
(Example)
81 01 04 38 FF
(Example)
81 01 04 38 02 FF
(Example)
81 01 04 08 02 FF
(Example)
Inquiry Command 81 09 04 38 FF
(Example)
81 09 05 38 FF
(Example)
Address Set 88 30 01 FF
IF_Clear(Broadcast) 88 01 00 01 FF
IF_Clear (For x) 8x 01 00 01 FF
Command Cancel 8x 2y FF
Reply Message
90 41 FF (Acknowledge)+90 51 FF
(Completion)
90 42 FF 90 52 FF
90 60 02 FF (Syntax Error)
90 60 03 FF
(Command Buffer Full)
90 61 41 FF
(Command Not Executable)
90 62 41FF
90 50 02 FF (Completion)
90 60 02 FF (Syntax Error)
88 30 02 FF
88 01 00 01 FF
z0 50 FF (Completion)
z0 6y 04 FF
(Command Canceled)
z0 6y 05 FF (No Socket)
Command List
Comments
Returns Acknowledge when a command has
been accepted, and Completion when a
command has been executed.
Accepted a command which is not supported
or a command lacking parameters.
There are two commands currently being
executed, and the command could not be
accepted.
Could not execute the command in the
current mode.
Acknowledge is not returned for the inquiry
command.
Accepted a command which is not supported.
Returned the device address to +1.
Returned the same command.
Acknowledge is not returned for this
command.
Returned when the command of the socket
specified is canceled. Completion for the
command canceled is not returned.
Returned when the command of the specified
socket has already been completed or when
the socket number specified is wrong.