Creating A Camera Specification File - Canon VB-M700F Operation Manual

Creating a Camera Specification File

You can load a camera list in the [Select Camera] dialog box (p. 3-3) if you create a camera specification file which lists
connection information for cameras. The camera list allows for simple switching between camera connections for multiple
cameras. Create a camera specification file beforehand using a text editor. The file must be saved in CSV file format.
Camera Specification File Content
The 1st row in the camera specification file is the header row. Enter a title for each column.
Camera information is listed for one camera per row starting from the 2nd row.
Enter the following information for each column.
Column
Registered Name
Host Name
Port Number
Administrator User Name
Administrator Password
SSL Communications
1st row
→
Header row
From 2nd row
Camera
information for
1 camera per
line (up to 30
cameras)
Important
Up to 30 cameras can be registered. If camera information for more than 31 cameras is listed, an error will occur when the file is loaded
into the Camera Angle Setting Tool.
3
-10
The camera name. Displayed in the camera list during connection.
The camera's host name or IP address.
The camera's HTTP port (factory default setting is 80).
The camera's administrator user name (factory default setting is "root").
The camera's administrator password (factory default setting is "camera").
SSL communications: 1 No SSL communications: 0 (factory default setting is 0).
Registered Name Host Name
↓ ↓
RegisterName HostName
B1F VB-M700F 192.168.100.1
1Fa VB-M600VE 192.168.100.2
1Fb VB-M600D 192.168.100.3
. .
. .
. .
. .
. .
Content
Administrator
Port Number
User Name
↓ ↓
PortNumber UserName
80 root
80 root
80 root
. .
. .
. .
. .
. .
Administrator SSL
Password Communications
↓ ↓
Password ConnectType
camera1 0
camera2 0
camera3 0
. .
. .
. .
. .
. .