Obtaining Camera Control Privileges - Canon VB-M700F Operation Manual

(9) Slider for tilt
This slider is used to control the tilt (vertical
movement) of the camera.
(10)Slider for pan
This slider is used to control the pan (horizontal
movement) of the camera.
(11)Slider for zoom
This slider is used to control the zoom ratio.
You can zoom in (telephoto) by moving the knob
upwards or zoom out (wide-angle) by moving the
knob downwards.
(12)[BLC] (Back Light Compensation) button
This button turns on/off backlight compensation. This
control is effective when the image is dark due to
backlight.
(13)[Get a Snapshot] button
A still image from the moment of clicking is displayed
in a new window.
(14)[Panorama Display] button
The panorama display panel is displayed.
(15)Information Field
Information messages, warning messages and error
messages are shown to the user.
(16)Panorama Display Panel
This panel is displayed upon clicking the [Panorama
Display] button.
(17)Panorama Display Area
Displays panorama images registered in the camera.
You can operate the camera by controlling the frame
lines within the panorama display area.
(18)Preset selection box
You can control the camera with presets registered in
the camera beforehand.

Obtaining Camera Control Privileges

The camera cannot be controlled by multiple users
simultaneously. Only the user with the control privileges
can control the camera. To perform backlight
compensation camera control, you must obtain control
privileges first.
7
-8
How to Operate
Click the [Obtain/release Camera Control] button to obtain
the control privileges.
Admin Viewer
Camera Control
Privilege Display
Displays camera
control privilege
status.
[Obtain/release Camera Control]
button
This button is used to obtain/release the
camera control privileges.
* With the VB Viewer, you can only obtain
the camera control privileges.
Camera Control Privilege Status Indicator
Display of the camera control buttons and camera control
status indicator changes according to the status of control
privileges shown as follows.
Control privileges not assigned
The control privilege status
indicator is shown in gray
Waiting for control privileges
When waiting for control privileges in the VB
Viewer, the remaining standby time is shown
on the control privilege status indicator.
Control privileges assigned
(restricted time counting down)
If another user is waiting for control privileges
while you are assigned control privileges,
your remaining time is shown on the control
privilege status indicator.
Control privileges assigned
The control privilege status indicator is shown
in blue.
The [Obtain Camera Control] button in the VB
Viewer is blue in the center.
The [Obtain/release Camera Control] button in
the Admin Viewer is yellow green in the
center.
Video paused
The video is paused when the viewer is in full
screen mode. An icon indicating the paused
status is shown in the control privilege status
indicator.
VB Viewer