Feature Guide References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when the channel type is TIE.
Value Range
Yes, No
Maintenance Console Location
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone. This
setting is only available when Channel Type on this screen is set to DDI/DID.
Value Range
Disable, Enable
Maintenance Console Location
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
None
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the tone.
Value Range
Disable, Enable
3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
PC Programming Manual
233