Yamaha YSP-3000 Service Manual page 38

YSP-3000/YSP-30D/HTY-7030
2. RAM THROUGH
The signal is not changed into beam and output from
the channel specified by the sub-menu.
When 2CH signals are input, they are distributed as
follows at DSP1 (IC5 DSP P.C.B.).
L CH ..... FRONT L, SURROUND L, CENTER, LFE
R CH .... FRONT R, SURROUND R
Delay of each channel processed at DSP1 (IC5 DSP
P.C.B.) is valid.
RAM THR ALL
• All outputs (FRONT L/R, CENTER, SURROUND L/R,
LFE) are provided.
RAM THR FRONT L
• FRONT L output.
• LFE is output through FRONT L only but not in digital
full bit.
RAM THR CENTER
• CENTER output.
• LFE is output through CENTER only but not in digital
full bit.
RAM THR FRONT R
• FRONT R output.
• LFE is output through FRONT R only but not in digital
full bit.
RAM THR SURROUND R
• SURROUND R output.
• LFE is output through SURROUND R only but not in
digital full bit.
RAM THR SURROUND L
• SURROUND L output.
• LFE is output through SURROUND L only but not in
digital full bit.
RAM THR LFE (SUBWOOFER OUT)
• LFE output.
38
2.RAM THR ALL
2.RAM THR FL
2.RAM THR C
2.RAM THR FR
2.RAM THR SR
2.RAM THR SL
2.RAM THR LFE