D-Link DCS-7000L User Manual page 32

Section 4: Configuration
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE account. Re-
Password:
enter your password in the Confirm Password field. You may
obtain this information from your ISP.
HTTP Port:
The default port number is 80.
Access Name for
The default name is video#.mjpg, where # is the number of the
Stream 1~3:
stream.
HTTPS Port:
You may use a PC with a secure browser to connect to the HTTPS
port of the camera. The default port number is 443.
RTSP Port:
The port number that you use for RTSP streaming to mobile
devices, such as mobile phones or PDAs. The default port number
is 554. You may specify the address of a particular stream. For
instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp
where the x.x.x.x represents the ip address of your camera.
Enable CoS:
Enabling the Class of Service setting implements a best-effort
policy without making any bandwidth reservations.
Enable QoS:
Enabling QoS allows you to specify a traffic priority policy to
ensure a consistent Quality of Service during busy periods. If the
DCS-7000L is connected to a router that itself implements QoS,
the router's settings will override the QoS settings of the camera.
Enable IPv6: Enable the IPv6 setting to use the IPv6 protocol. Enabling the
option allows you to manually set up the address, specify an
optional IP address, specify an optional router and an optional
primary DNS.
D-Link DCS-7000L User Manual 32