Internet Connection Setup Wizard - D-Link DCS-7000L User Manual

Section 4: Configuration
This wizard will guide you through a step-by-step process to configure your new
D-Link Camera and connect the camera to the Internet. Note that this wizard will
not register your camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server (usually enabled on
your router) to assign the camera its IP settings. If you want to manually assign the
IP settings, select Static IP Address and enter the following details:
IP Address: Enter an IP address for your camera.
Subnet Mask: Enter the subnet mask of your network.
Default Enter the default gateway address. This is usually the IP address
Gateway: of your router.
Primary DNS: Enter the primary DNS server's IP address. This is usually the IP
address of your router.
Secondary DNS: Enter the secondary DNS server's IP address. This is optional.
If you are required to connect using PPPoE, select Enabled and enter the Username
and Password for your PPPoE connection. Only select this option if your camera is
directly connected to your broadband modem. If it is on a network with a router or
gateway, do not select this option.
Click Next to continue.
D-Link DCS-7000L User Manual

Internet Connection Setup Wizard

26