Panasonic AG-CPD15P Operating Instructions Manual page 33

Setup
(continued)
Setting Item
5 Date/Time
TimeZone
Style
Date/Time
6 Trigger
GPIO
Detection
OSD
Printable
7 OSD
OSD
Display Position
Trigger
Time
Factory Default Value Description
Date, Time and Time Zone Settings
Eastern Time zone
Standard Hawaii Standard Time,
Daylight Yukon Standard (Daylight Saving) Time,
Saving Pacific Standard (Daylight Saving) Time,
Time Mountain Standard (Daylight Saving) Time,
Central Standard (Daylight Saving) Time,
Eastern Standard (Daylight Saving) Time,
Atlantic Standard (Daylight Saving) Time,
Asia Tokyo
ISO Date display format setup
Setting : ISO (YYYY-MM-DD HH:MM:SS format),
Current time Year/Month/Day Hour:Min.:Sec.
GPIO1 to 8, Recording Trigger Settings
ON All GPIO input or no input
Setting : ON (All GPIO input permission), OFF
N Recording trigger detection type
Setting : N
OFF Show each GPIO bit in the OSD
Setting : ON, OFF
– Character definition when one letter is
displayed
Setting : A - Z, –
Embedded OSD(On Screen Display)
ON OSD on/off setting
Setting : ON, OFF
L-Upper Location display setting
Setting : L-Upper
ON OSD setting during input from GPIO1 to 8
Setting : ON, OFF
ON Date and time display setting
Setting : ON, OFF
USA (MM/DD/YYYY HH:MM:SS format)
(no input),
H (rising edge trigger),
Level H (high level trigger),
L (falling edge trigger),
Level L (low level trigger),
B (both-edge trigger),
SPEED (vehicle speed pulse,
GPIO8 only)
(upper left),
R-Upper (upper right),
L-Bottom (bottom left),
R-Bottom (bottom right)
33