Included Parts - HP 10:10 LAN Bridge MB Installation And Reference Manual

Features (continued)
Can be managed remotely from a network management station that supports SNMP
over IP (using the configured IP address) or IPX. (See "Network Management" in
chapter 6, "How the Bridge Works".)
Can be downloaded with new firmware enhancements either from a PC attached to the
console port or over the network. (See "Firmware Enhancements" in chapter 6, "How
the Bridge Works".)
Comes with metal brackets that can be easily attached to the bridge for mounting it in a
standard 19-inch telco rack or on a wall.

Included Parts

These parts are included with the HP 10:10 LAN Bridge MB product:
HP 10:10 LAN Bridge MB (HP 28673-60002).
Accessories kit (28673-60006), including:
– two mounting brackets (5001-5624).
– four 10-mm M4 screws (0515-0780).
– four 5/8-in. 10-32 screws (2680-0302).
– two AUI retainers (5062-3351).
– four self-adhesive rubber feet (0403-0427).
– BNC insulating cover (1252-1650).
HP 10:10 LAN Bridge MB Installation Quick Reference (28673-90002).
HP 10:10 LAN Bridge MB Installation and Reference Guide (28673-90001).
Power cord (one of the following)
– United Kingdom (8120-1351).
– Australia (8120-1369).
– Europe (8120-1689).
– United States/Canada 125V (8120-1378).
– United States/Canada 250V (8120-0698).
– Switzerland (8120-2104).
– Denmark (8120-2956).
– Japan (8120-4753).
Introducing the HP 10:10 LAN Bridge MB 1-3