Panasonic KX-TDA0480 Installation Manual page 35

• It is not possible to direct calls to a specific port within a Trunk Group.
The default configuration is for one Trunk Group made up of all two ports. This configuration
is defaulted to Hunt Pattern 1 and would be associated with a single PBX Code (Destination
number). In the Trunk Priority folder settings this single group is defaulted to Priority one.
If the default configuration is used, then all that is necessary is to define the connection
characteristics for the single Trunk Group (e.g., Trunk Group 1). Since no additional Trunk
Groups are available, no additional Hunt Pattern information is required and the Trunk Priority
section of this worksheet can be ignored.
If additional Trunk Groups are defined (e.g., Trunk Group2 etc.) then Hunt Patterns and Trunk
Priorities must be configured.
See the next Topic in this section, "Trunk Priority".
• Trunk Groups must be defined using Trunk Data before Hunt Patterns can be configured.
Destination Number (HNTPTN)
Use the Destination Number field to record the PBX Code to be accessed when calling through
the KX-TDA0480 (8 digits maximum). Every Hunt Pattern must be associated with a PBX
Code.
Hunt Pattern No. (HNTPTN)
Use the Hunt Pattern No. field to record the number of the pattern to be associated with the
Destination Number. Each Destination number will have a Hunt Pattern number associated
with it (i.e., 1 or 2.).
Trunk Priority
Use the Trunk Priority section of the Worksheet to define the order (priority) in which alternate
Trunk Groups will be searched in the event that a connection is not established within the first
Trunk Group. This feature can be used to distribute traffic on PBX port.
Priority 1 is the first Trunk Group searched. If a connection cannot be established in the Priority
1 group, additional Trunk Groups are searched in priority order.
The Destination numbers searched using this feature are determined by the Hunt Pattern
Number assigned in the Hunt Pattern section of the worksheet. (See previous Topic.)
Installation Manual
Planning
35